PRODUCT DESCRIPTION:

Ezymix Tile Bond is a cementitious, non-shrink polymer containing, thin bed tile adhesive used for permanent fixing of tiles. Suitable for tropical and hot climate conditions. It meets the requirements of the C1T standard for Tile Adhesive. It is equally better for indoor/outdoor applications.

ADVANTAGES:

High Bond Strength
Easy to use, just add water
Excellent workability
Excellent pot life
Suitable for indoor and outdoor applications

STANDARDS:

Ezymix Tile Adhesive complies with ISO 13007-1 and BS EN 5385-1

PRODUCT DATA:

TYPE: Grey Cementitious powder

SURFACE PREPARATION:

Surfaces must be clean, sound, and free from grease, oil, and loosely adhering particles. Before installing tiles, it is essential to repair all defective areas.

APPLICATION:

Apply Tile Bond evenly with a 6mm notched trowel for tiles up to 150mm x 150mm and for larger tiles use a 12mm x 12mm notched trowel. Lay the tiles with good pressure, twisting to ensure good contact with the adhesive. In more demanding exterior situations, or if tiles with high ribs or lugs are being used, it is preferable to spread the back of the tiles with a thin layer of adhesive in addition to the adhesive being troweled onto the substrate, before laying. For wall tiling a minimum final bed thickness of 3mm is recommended. Do not spread more than 1mm of adhesive at any one time as skinning may occur affecting final adhesion. Press tiles onto the adhesive before it skins and ensure that the tiles are fully supported with the adhesive with no voids.

TECHNICAL DATA:

Appearance	Grey Powder
Composition	Contains cement and selected aggregates along with additives.
Maximum aggregates size	0.4-0.6mm
Bulk Density	1.55+0.05Kg/Liter
Wet density	1.85 Kgs. /Liter
Open Time	25 min at 25⁰C
Pot life	4 hrs. At 25⁰C
Pull out Strength	28 Day: 1.2 MPa
Slip Test	0.1 mm (as per BS EN-1308)
Approximate Yield/Coverage	2.0 Kgs. /m² at 4 mm thickness 2.7 Kgs. /m² at 6 mm thickness

PACKAGING:

20 Kgs. & 40 Kgs. Valve craft bag

STORAGE CONDITION:

Store in a dry area between 5⁰C and 35⁰C, Protect from sunlight

SHELFLIFE:

10 months from production date if stored properly in original unopened packaging in a cool, shaded area.

HEALTH AND SAFETY:

Users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological, and other safety-related data for information and advice on the safe handling, storage, and disposal of chemical products.

It is advised to use gloves while applying Tile Adhesive. Do not reuse craft bags, dispose of them according to local regulations.

Tile Adhesive Standard EM-001