PRODUCT DESCRIPTION:

Ezymix Tile Adhesive White flexible powder adhesive for fixing medium-large sized ceramic tiles, c2 classified according to EN 12004.

Ezymix Tile Adhesive White is a one-packed premixed adhesive made of high-quality types of cement, selected silica/quartz sands, and specific additives. It achieves good flexible adhesive layers up to 15 mm thick. It is suitable for porcelain and natural stone, heated floors, and industrial flooring areas.

ADVANTAGES:

No vertical slipping
Pot life up to 2h 30min at 20°C
Excellent adhesion to the substrate
Smooth creamy consistency for easy application

TESTS STANDARDS:

Tested according to EN 1348, EN 1308, and EN 12002

PRODUCT DATA:

TYPE: White Cementitious powder

SURFACE PREPARATION:

Surfaces must be clean, sound, and free from grease, oil, and loosely adhering particles. Before installing tiles, it is essential to repair all defective areas.

APPLICATION:

Apply Tile Bond evenly with a 6mm notched trowel for tiles up to 150mm x 150mm and for larger tiles use a 12mm x 12mm notched trowel. Lay the tiles with good pressure, twisting to ensure good contact with the adhesive. In more demanding exterior situations, or if tiles with high ribs or lugs are being used, it is preferable to spread the back of the tiles with a thin layer of adhesive in addition to the adhesive being troweled onto the substrate, before laying. For wall tiling a minimum final bed thickness of 3mm is recommended. Do not spread more than 1mm of adhesive at any one time as skinning may occur affecting final adhesion. Press tiles onto the adhesive before it skins and ensure that the tiles are fully supported with the adhesive with no voids

WATER NEEDED:

4.0 – 5.0 Liters per 20Kg bag

MATERIAL CONSUMPTION:

Thickness Average consumption

8mm 4.5 kg/m²

10mm 5.5 kg/m²

15mm 7.5 kg/m²

CURING SPEED

Temperature Open Time Curing Time

>+40°C 15 minutes 8 hours

+20°C to +35°C 20 minutes 15 hours

+10°C to +20°C 35 minutes 30 hours

+5°C to +10°C 75 minutes 45 hours

Statistical data obtained under standard conditions:

Aspect	WHITE Powder
The apparent density of the powder	1.5 ± 0,2 g/cm³
The density of the mixed product	1.7 ± 0,2 g/cm³
Adjustment time Approx.	30 min. (depending on weather conditions)
Paste shelf life Approx.	2 hours (depending on weather conditions)
Initial tensile adhesion strength	> 1.0 N/mm²
Tensile adhesion strength after water immersion	> 1.0 N/ mm²
Tensile adhesion strength after heat aging	> 1.0 N/ mm²
Tensile adhesion strength after freeze-thaw cycles	> 1.0 N/ mm²
Vertical Slip (EN 1308)	less than 0.5mm
UNE-EN 12004 Classification	C2 TE
UNE-EN 12002 Classification	S1
Approximate yield	4 Kg/m²

PACKAGING:

20 Kgs. & 40 Kgs. Valve craft bag

STORAGE CONDITION:

Store in a dry area between 5⁰C and 35⁰C, Protect from sunlight

SHELFLIFE:

10 months from production date if stored properly in original unopened packaging in a cool, shaded area.

HEALTH AND SAFETY:

Users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological, and other safety-related data for information and advice on the safe handling, storage, and disposal of chemical products.

It is advised to use gloves while applying Tile Adhesive. Do not reuse craft bags, dispose of them according to local regulations.

Tile Adhesive plus EM-003