PRODUCT DESCRIPTION:

Ezymix Plaster Grey EM-001 is a cement-based ready-to-use premix plaster for internal and external use and is an ideal substrate for wall putty, wallpapers, decorative plasters, paints, Stone Cladding, etc. Ezymix Plaster Grey EM-001 is suitable for the application of Internal and external Brick walls.

ADVANTAGES:

Ready to use.
Good Flow
Good Adhesion to the substrate.
Save space (No dumping of sand on site)
Accurate Cement content.
Consistent Strength (No batch error)
Durable
Save time (No site mix)
Can be left bare or covered with appropriate finishing.

SURFACE PREPARATION:

All loose particles of dust & oil shall be cleaned off the surface prior to application. For hot climatic conditions, the surface may be dampened with potable water.

TESTS STANDARDS:

Tested according to BS EN 13914-1, and BS EN 13914-2

PRODUCT DATA:

TYPE: Cementitious Grey powder

SURFACE PREPARATION:

Surfaces must be clean, sound, and free from grease, oil, and loosely adhering particles. Before installing tiles, it is essential to repair all defective areas.

APPLICATION DETAILS:

For manual application, it is important that water is premeasured in accordance with the amount of material used. The mortar powder should be added over the water to avoid the settlement of the material at the bottom of the mixing container. The mixing container should be uncontaminated, non-corrosive, and clean. Only potable water should be used for mixing. It is also recommended that the material should be mechanically mixed with a mortar mixer or other mechanical mixing methods to obtain a consistent lump-free mix.

TECHNICAL DATA:

Appearance	Grey Powder
Composition	Contains Cement and selected aggregates along with additives to improve consistency, workability & durability
Maximum aggregates size	2mm
Water application	22% ± 5%
Wet mix life	Tested as per BS EN 1015-9 Approximately < 2 hours @ 20⁰C
Compressive Strength:	Tested as per BS EN 1015-11 28 Days 4.00 N/mm²
Flexural Strength:	Tested as per BS EN 1015-12 28 Days 1.00N/mm²
Approximate Yield/Coverage	1.6kg/m2/mm

PACKAGING:

50 Kgs. Valve craft bag

STORAGE CONDITION:

Store in a dry area between 5⁰C and 35⁰C, Protect from sunlight

SHELFLIFE:

10 months from production date if stored properly in original unopened packaging in a cool, shaded area.

HEALTH AND SAFETY:

Users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological, and other safety-related data for information and advice on the safe handling, storage, and disposal of chemical products.

It is advised to use gloves while applying Tile Adhesive. Do not reuse craft bags, dispose of them according to local regulations.

Premix Plaster Grey EM 111