TECHNICAL SPECIFICATION
TECHNICAL DATA SHEET
CALCULATOR
PRODUCT DETAILS
PRODUCT DESCRIPTION:
Ezymix Tile Bond is a cementitious, non-shrink polymer containing, thin bed tile adhesive used for permanent fixing of tiles. Suitable for tropical and hot climate conditions. It meets the requirements of the C1T standard for Tile Adhesive. It is equally better for indoor/outdoor applications.
ADVANTAGES:
- High Bond Strength
- Easy to use, just add water
- Excellent workability
- Excellent pot life
- Suitable for indoor and outdoor applications
STANDARDS:
Ezymix Tile Adhesive complies with ISO 13007-1 and BS EN 5385-1
PRODUCT DATA:
TYPE: Grey Cementitious powder
SURFACE PREPARATION:
Surfaces must be clean, sound, and free from grease, oil, and loosely adhering particles. Before installing tiles, it is essential to repair all defective areas.
APPLICATION:
Apply Tile Bond evenly with a 6mm notched trowel for tiles up to 150mm x 150mm and for larger tiles use a 12mm x 12mm notched trowel. Lay the tiles with good pressure, twisting to ensure good contact with the adhesive. In more demanding exterior situations, or if tiles with high ribs or lugs are being used, it is preferable to spread the back of the tiles with a thin layer of adhesive in addition to the adhesive being troweled onto the substrate, before laying. For wall tiling a minimum final bed thickness of 3mm is recommended. Do not spread more than 1mm of adhesive at any one time as skinning may occur affecting final adhesion. Press tiles onto the adhesive before it skins and ensure that the tiles are fully supported with the adhesive with no voids.
TECHNICAL DATA:
Appearance | Grey Powder |
Composition | Contains cement and selected aggregates along with additives. |
Maximum aggregates size | 0.4-0.6mm |
Bulk Density | 1.55+0.05Kg/Liter |
Wet density | 1.85 Kgs. /Liter |
Open Time | 25 min at 25⁰C |
Pot life | 4 hrs. At 25⁰C |
Pull out Strength | 28 Day: 1.2 MPa |
Slip Test | 0.1 mm (as per BS EN-1308) |
Approximate Yield/Coverage | 2.0 Kgs. /m2 at 4 mm thickness 2.7 Kgs. /m2 at 6 mm thickness |
PACKAGING:
20 Kgs. & 40 Kgs. Valve craft bag
STORAGE CONDITION:
Store in a dry area between 5⁰C and 35⁰C, Protect from sunlight
SHELFLIFE:
10 months from production date if stored properly in original unopened packaging in a cool, shaded area.
HEALTH AND SAFETY:
Users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological, and other safety-related data for information and advice on the safe handling, storage, and disposal of chemical products.
It is advised to use gloves while applying Tile Adhesive. Do not reuse craft bags, dispose of them according to local regulations.
REVIEWS
SHIPPING & RETURNS
Returns Policy
A. We accept returns of unopened and unused products within [X] days from the date of delivery. To initiate a return, please contact our customer support team to obtain a Return Merchandise Authorization (RMA) number.
B. Once the return is approved, you will be responsible for shipping the product back to our designated address. After receiving and inspecting the returned item, we will process your refund, excluding any shipping charges.
C. Please note that certain products may not be eligible for return due to their nature or usage restrictions. These products will be clearly marked on our website.
Shipping Policy
A. Shipping Areas: We offer shipping services to most locations within Pakistan where our products are legally allowed to be shipped.
B. Shipping Charges: The shipping charges will be calculated based on the destination and weight of the order. These charges will be displayed at the checkout before you finalize your purchase..