Mortar Brick Joint

EzyMix Mortar Brick Joint is a ready to use premixed highly polymer modified for block laying masonry bricks, curbstones, pavers, etc. Brick Joint is the perfect solution for adhesives in construction and home improvement projects. With superior adhesiveness, it’s an ideal choice for building, repairing and reinforcing materials. It’s simple to use and is guaranteed to provide reliable, long-term results.

APPLICATION:

• Ready to use and easy to apply.
• Suitable for both exposed and covered applications.
• Space-saving (no need for on-site dumping).
• Guaranteed accurate cement content.
• Consistently provides high strength without batch variations.
• Highly durable.
• Excellent adhesion with bricks and other materials.
• Saves time with no need for on-site mixing.

SURFACE PREPARATION:

Ensure that the bricks are clean, sound, and free of loose materials before commencing laying. If a support is used for the laying of bricks or blocks, ensure that it is free from dust, oil, grease, or any other material which may cause debonding. It is strongly recommended to avoid humidity arising applied on foundations by protecting the substrate by using a suitable waterproofing system. A variety of different waterproofing systems can also be recommended by Ezymix.

PRODUCT PREPARATION:

For proper mixing, it is important that water is premeasured in accordance with the amount of material used. The mortar powder should be added over the water to avoid the settlement of the material at the bottom of the mixing container. The mixing container should be uncontaminated, non-corrosive and clean. Only potable water should be used for mixing. It is also recommended that material should be mechanically mixed with a mortar mixer or other mechanical mixing methods to obtain a consistent lump free mix.

APPLICATION:

EzyMix Mortar Brick Joint is specifically designed to adhere to the code of applications as prescribed in standards The correct alignment of the first row is of the utmost importance and must be ensured. Using anappropriate trowels and tools, spread an appropriate layer of the mortar over the entire contact surface. Ensure that the bricks are correctly aligned. Remove all excess mortar prior to hardening. It is important to allow a suitable gap between the wall and the slab to avoid cracks forming. EzyMix Mortar Brick Joint is also ideal for laying bricks and blocks as per the specification of various wall waterproofing systems as prescribed in various systems.

CURING:

No Curing Required in General, however maximum curing for 72 hours where hot climatic conditions prevail. SHELF LIFE Expiration of EzyMix Mortar Brick Joint is at 6 months after production date under dry and sheltered conditions.

PACKAGING:

EzyMix Mortar Brick Joint is available in 50 KG bags

HEALTH & SAFETY:

EzyMix Mortar Brick Joint is regarded as non-hazardous for transportation. Do not reuse bags or containers and dispose them off as per local rules and regulations. Gloves and suitable masks can be worn during application. Please refer to product MSDS for further health and safety data.